A Red Thunder keyboard not charging can be a frustrating experience, especially when you’re in the midst of an important task.

In this comprehensive guide, we’ll explore six potential fixes for this issue, ensuring that you avoid repetitive solutions.

Follow these troubleshooting steps to identify and resolve the problem and get your Red Thunder keyboard back in action.

First and Foremost:

Before delving into the practical fixes for a Red Thunder keyboard not charging, it’s crucial to consider three key points with respect to our readers' time:

If you’ve recently purchased your Red Thunder keyboard and it’s already showing charging issues, it might be wise to request a refund.

Save both your money and time by exploring alternative keyboards available at a similar price point, like “Razer Tartarus Pro” and “Logitech G13”.

Typically, a Red Thunder keyboard is designed to work flawlessly for about 3-4 years. If you’ve been using your keyboard for this duration, you’ve already received good value for your money.

Attempting to fix a keyboard that’s served its lifespan might only provide a temporary solution (1-2 months at best). Relying on such a fixed keyboard for consistent use may not be a reliable option.

If your Red Thunder keyboard has been in use for less than three years, you can explore the practical fixes mentioned below to address the charging issue.

These troubleshooting steps are designed to help extend the lifespan of your keyboard if it’s within its expected working period.

How To Fix Red Thunder Keyboard Not Charging

Check the USB Port and Cable

If your Red Thunder Keyboard isn’t charging, start by checking the charging cable and port. Ensure the cable isn’t damaged and is properly connected to both the keyboard and a power source.

If the cable is fine, attempt charging from a different power source or USB port. If the issue persists, it could be due to a problem with the charging port or battery.

Clean the charging port using a soft brush or compressed air to clear any debris obstructing the connection.

If the port is damaged or the battery is faulty, reaching out to Red Thunder’s customer support for further assistance may be necessary.

Restart your keyboard and device

If your Red Thunder Keyboard isn’t charging, try restarting both the keyboard and your device. This may help resolve any connectivity issues between them.

To restart your Red Thunder Keyboard, turn it off and then back on again. For certain models, like the Red Thunderkeys PRO/PROplus, you should notice the caps lock light turning on for approximately 4 seconds before turning off. If not, ensure your Red Thunder Keyboard is charged.

To restart your device, such as a tablet or computer, hold down the power and home (or equivalent) buttons simultaneously until it resets. Release the buttons when you see the device’s logo appear.

After restarting, turn off your Red Thunder Keyboard and then turn it back on. You should observe the caps lock light turning on for about 4 seconds and then turning off. If not, make sure your Red Thunder Keyboard is charging.

If, after charging, the caps lock light fails to illuminate or remains dim, there may be an issue with your Red Thunder Keyboard. In such cases, reach out to Red Thunder’s customer support for further assistance.

Reset the Keyboard

Sometimes, a simple reset can work wonders. To reset a Red Thunder keyboard, you can try holding down the power button for a few seconds or removing and reinserting the battery if applicable.

This can help clear any minor glitches or disruptions causing the charging problem. If your Red Thunder keyboard has a removable battery, taking it out and reinserting it can also reset the battery connection and resolve charging problems.

For keyboards with non-removable batteries, it’s advisable to contact Red Thunder’s customer support for professional assistance.

Also Read: Sandstrom Bluetooth Keyboard Not Working

Update firmware and software

To resolve the issue of a Red Thunder keyboard not charging, one of the solutions is to update the firmware and software.

This can be crucial in ensuring the keyboard functions optimally. By checking for firmware updates on the manufacturer’s website and installing them as needed, you can address any software-related issues that might be causing the charging problem. 

Keeping the keyboard’s software up to date is essential for its performance and compatibility with various devices.

Check the Battery

If none of the previously mentioned solutions resolve the issue, there could be a problem with the battery of your Red Thunder Keyboard.

Keep in mind that the Red Thunder Keyboard utilizes a Lithium Polymer (LiPo) battery with a capacity of 1850 mAh, typically having a lifespan of around 3 years. If you’ve been using the keyboard for more than 3 years, it might be time to consider replacing the battery.

However, if you’ve recently purchased the keyboard, check for any signs of battery damage. Start by checking the battery level, which can be done by pressing the power button for a few seconds until the battery level is displayed. If the battery level is low, try charging the keyboard for a few hours before checking again.

If this seems to be the case, you may need to either replace the keyboard or seek professional repair services. If your Red Thunder Keyboard is still within the warranty period, reaching out to Red Thunder’s customer support is the recommended course of action.

Contact Customer Support

If the problem persists after trying the above fixes, it’s time to reach out to Red Thunder’s customer support. Please provide them with detailed information about the issue and the steps you’ve taken to troubleshoot.

They can offer specific guidance tailored to your keyboard model or initiate the process for a replacement if necessary.

Maintenance Tips for the Red Thunder Keyboard

Here are some maintenance tips for the RedThunder keyboard:

1. Cleaning:

Regularly clean the keyboard to remove dust and debris. Use a can of compressed air to blow out any particles from under the keys.

2. Avoid Spills:

Keep the keyboard away from liquids and food to prevent damage to the internal components. If a spill occurs, immediately unplug the keyboard and clean it thoroughly to prevent any damage.

3. Firmware Updates:

Check for firmware updates for the keyboard on the manufacturer’s website and install them as needed to ensure the keyboard is running the latest software.

4. Battery Maintenance (if applicable):

If the keyboard is rechargeable, use a lower than DC:5V adapter to charge, preferably using the computer’s USB port directly. Turning off the keyboard light can extend the battery life moderately.

5. Key Lifespan:

The keys of the RedThunder keyboard have a lifespan of 10,000,000 keystrokes, so you can expect the keyboard to last for a long time with regular use.

These tips can help maintain the RedThunder keyboard and ensure it functions optimally for an extended period.


In conclusion, a Red Thunder keyboard not charging can be resolved through systematic troubleshooting.

By following these six steps, you can identify and address the root cause of the issue. If all else fails, don’t hesitate to contact Red Thunder’s customer support for personalized assistance.

Remember, these troubleshooting steps are designed to cover a broad range of scenarios, ensuring you have a comprehensive guide to revive your Red Thunder keyboard.

Winston, an experienced engineer with over 10 years in the tech industry, graduated from Stanford University. Having worked with renowned tech leaders like InnovateTech, Nexus Solutions, and Quantum Systems, his expertise shines through in his blog, Tech Fixes, where he shares practical solutions to common product issues.